-40%
2x72
2x72
2x72
2x72
2x72
2x72
2x72
2x72
2x72
2x72
2x72

2x72" Belt Grinder Wheels-130 mm Drive -24 mm Shaft, 100 mm Tracking 50 mm Idler

$ 65.47

Availability: 108 in stock
  • Brand: Smart Machines
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Item Width: 2 in
  • MPN: Does Not Apply
  • Country/Region of Manufacture: Poland
  • Wheel Diameter: 5 in
  • Model: 130/24-100-50
  • Application: Grinding
  • All returns accepted: Returns Accepted
  • Sanding Grade: Any Grade
  • Condition: New
  • Type: Grinding Wheel
  • Item Diameter: 2 in
  • Item Length: 2 in
  • Refund will be given as: Money Back
  • Voltage: Does Not Apply

    Description

    Belt Grinder Wheel Set
    CNC machined from Aluminium 6061
    This is as good as it can get
    Wheel Set Description
    We are proud to introduce our Newest Belt Grinder wheel set.
    Set Includes:
    One
    130 mm diameter Drive Wheel:
    D
    rive wheel is CNC machined with 24 mm bore (H7 tolerance).  Bore is equipped with a 8 mm key way and a M6x20 mm set screw. Surface of wheel is truly crowned to insure belt won't jump off wheel . Please refer to the wheel's sketch for the exact wheel dimensions
    Two
    x 50 mm diameter Idler Wheels:
    E
    ach wheel is fitted with
    three
    12 mm bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings
    (ball bearings should not bear lateral load)
    One
    100 mm diameter Track Wheel:
    Large Tracking wheels adds considerable control and stability of the sanding belt (from experience)
    E
    ach wheel is fitted with
    three
    12 mm bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings
    (ball bearings should not bear lateral load)
    YES
    we make Custom Orders
    If you cannot find the wheel's shape/design or the dimensions that you are looking for, please contact us via eBay messaging system. Describe clearly your requirement and we shall reply promptly with a quote. We shall create an ebay listing to enable you purchase that item
    Please Note:
    Due to machine setup time we have to place a
    minimum order quantity
    of 16 items of any type
    Shipping
    We understand that customers would like to receive their purchase as soon as possible. Therefore I provide postage service that is comparable -in speed- to local postal service. And to achieve that:
    All orders are shipped using GLS or FedEx economy
    Shipping is from Poland
    All order are shipped the same working day if paid by 3 PM central European time
    From experience, in most cases; Items arrive in 3-6 work days to all EU countries
    From experience, in most cases; Items arrive in 7-20 work days to North America and Australia
    Limitation of Liability
    In no event shall pulley-wheel be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of its products.