Baldor Tapered Spindle 3/8" Arbor Hole Friction Grip Dental Lathe Polishing "L"

Description

BALDOR TAPERED SPINDLE 3/8"
LEFT
Fits Baldor POLISHING LATHE
TAPERED SPINDLE
FITS BALDOR DENTAL LATHE MOTOR
S
The spindle is made to use with a
Baldor Dental Polishing motor.
Spindle is fits 3/8" Polishing lathes
has an inside diameter that is tapered to fit on the tapered shaft of a Baldor Dental Polishing motor. These are specifically made to fit Baldor motor shafts since they are not straight, but have a slight taper.
Spindles are a friction fit, they are pushed on to the shaft of the Baldor motor, to properly secure them onto the shaft, lightly tap with a soft mallet or a piece of wood.
To remove, just use the screw off spindle remover on the motor by simply unscrewing and turning it
until the spindle is pushed off of the tapered shaft.
.
Spindles is made of cold rolled steel is machined to close tolerances, made in U.S.A.
.
Spindle has a 3/8" Tapered arbor hole to work on the
LEFT Side
of Baldor 3/8" shaft motors.   The spindle arbor hole has a slight tapered to fit and be held on the Baldor Motor Lathes LEFT Side shaft.
Note: Spindle does not have tightening screws.
.
FEATURES:
·
Precision Quality
·
Machined - High Speed Lathe
·
Made from 3/4" Stock Material
SPECIFICATIONS:
JETS Product # 1603-212370
·
Material:
Cold Rolled Steel
·
Overall Length:
3-3/8" - 87mm
·
Spindle Body Length:
1-3/8" - 35mm
·
Spindle Tapered Length:
2" - 51mm
·
Arbor Hole
:
3/8" Tapered Friction Grip to Shaft
·
Weight:
2.75oz.
Spindle is made to be used on a 3/8" tapered shaft diameter and on the Left Hand Side of Motor with forward direction.
SHIPPING:  Via USPS FIRST CLASS MAIL
NOTE: Visit
JETSTOOLS
our ebay Store where you can see listings of various Commercial Grades of Spindles, Arbors, Miniature Mandrels and Holders along with more
J
ewelers
E
quipment
T
ools and
S
upplies
.
JETS Inc.
B4 613 CKSP M