Kampel SeamFil Color Kits For Countertop Laminate Repair (Woodgrain Colors)

Description

Kampel SeamFil 12 Tubes Color Kits (Woodgrain Colors)
Description
KAMPEL SEAMFIL 12 TUBES COLOR KITS
(WOODGRAIN COLORS)
901 White x 1
913 Brown x 1
914 Black x 1
918 Mahogany x 1
931 Maple x 2
933 Teak x 1
935 Birch x 1
936 Primary Yellow x 1
937 Primary Red x 1
940 Orange x 1
942 Butcherblock x 1
944 Retarder x 1
SF-99 Solvent x 1
Successfully repairing nicks, seams and gouges in laminate counter tops for over 60 years.
The “ORIGINAL” laminate repair solution. This user friendly product will quickly and easily fix damage, or fill seams on your laminate counter surface. Repair nicks, fill seams and make gouges all but disappear with this one-part system. SeamFil bonds mechanically to the substrate of laminate and dries hard, becoming a permanent part of the laminate surface. SeamFil also resists moisture, detergents, and other household products as effectively as the original laminate. Typical applications for this product are filling standard joints, cracks, chips and other imperfections where the dark substrate is visible. Properly used, SeamFil will hide defects beautifully for the life of the counter.
HOW TO GUIDE
Product Info:
1.
SeamFil is a single part, solvent based repair system for high pressure
laminated surfaces. It will cure in approximately one hour, but we
recommend 24 hours for total cure. SF99 Solvent is the ONLY
recommended solvent for use with SeamFil.
2.
One (one ounce tube of SeamFil) will approximately fill an 8 foot Seam
of Counter with an 1/8" bead. If the seam is wider than 1/16" (but
should never be larger than 1/8") a second application will probably be
necessary. It can be used to fill an area that is no longer than 1/4" in
diameter.
3.
SeamFil will not freeze because of the solvent .
4.
The shelf-life of SeamFil is 1 year if opened and correctly
capped, two years, if unopened.
5.
SeamFil can withstand heat up to 120 °
6.
SeamFil’s VOC is 48 (529 g voc / L) wet measurement and
SF99 Solvent is 100% VOC and will attack non-laminate surfaces like,
finished wood, PVC, etc.
7.
SeamFil dries to a matt finish. To obtain a Glossy Finish,
943 Clear Gloss should be added.
8.
To increase the cure time of SeamFil, 944 SeamFil Retarder can be
added to the mix.
9.
SeamFil is a one-part system that is a solid color. It does not have any
variation of color within the tube for patterns or woodgrain effects.
10.
SeamFil is NOT recommended for use on Solid Surface materials. Our
ColorFlex product is used for Solid Surfaces.
STANDARD COLOR KITS ALSO AVAILABLE
Track Page Views With
Auctiva's FREE Counter