PC-Products 025598 Plumbing Epoxy Repair Putty 2 Oz

Description

"PROTECTIVE COATING
"
REPAIR PUTTY
PC-Plumbing is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Plumbing is NSF rated safe for contact with potable water. PC-Plumbing can be applied to wet and dry surfaces. Cut, mix and apply. PC-Plumbing allows a working time of about 3 minutes and cures for service in 60 minutes.
Features:
2 oz
Epoxy repair putty
Cures wet or dry
Polypropylene or soft plastics
Nsf rated safe for potable water
Kneadable specifically for plumbing repairs
Sets hard in 20 minutes, bonds fiberglass, metals, glass, tile, pvc, ceramics & just about any other material except for polyethylene
Carded
Mixing:
Cut or twist off desired amount of epoxy. Mix by kneading putty with fingers until a uniform color is achieved. For ease of mixing warm putty to room temperature or above. Powder on hands (corn starch, baby powder) is helpful to minimize sticky epoxy contact before hardening begins.
Use latex gloves to avoid any issues.
Tips:
For best results, surface should be cleaned and free of rust, dust, and oil. Solvents such as denatured alcohol can be used to remove most contaminants. Whenever possible, lightly sand or rough up the surface to improve adhesion. For a smooth, finished surface, hand rub with wet finger or cloth prior to cure. Denatured alcohol is excellent for smoothing, shaping, and forming of putty epoxy. PC-Plumbing cures well even at cold temperatures (40