TYC49 Permanent Magnet Motors Synchronous Gear Motor 3.5W AC220V 3RPM~30RPM

Description

TYC49 Permanent Magnet Motors Synchronous Gear Motor 3.5W AC220V 3RPM~30RPM
● Model:
TYC49
● Size: φ50 X 20mm
● Eccentric shaft diameter 7mm
● Power supply: AC220V
● Input power: 3.5W
● Power supply mode: AC
● Running speed: Low speed motor
(TYC49
is a non-directional working mode, the direction of non-directional working mode is uncertain, the power interruption may change the rotation direction of the motor, and when the motor encounters a large resistance, it will automatically reverse to avoid overloading the motor, the motor reduction gear is Polyoxymethylene engineering plastic, please be careful when shooting! ! !
)
(The direction is uncontrollable.The gears are all made of polyoxymethylene plastic material.)
AC 220V Rated speed
3 rpm
Rated torque
5kg.cm
AC 220V Rated speed
5 rpm
Rated torque
4kg.cm
AC 220V Rated speed
10 rpm
Rated torque
2kg.cm
AC 220V Rated speed
15 rpm
Rated torque
1.5kg.cm
AC 220V Rated speed
20 rpm
Rated torque
1.2kg.cm
AC 220V Rated speed
30 rpm
Rated torque
0.8kg.cm
Features:
Low power consumption, high torque, low noise, small size, light weight, easy to use, controllable forward and reverse directions, etc.
Mainly used in:
TYC49 products are mainly used for the rotation of small electric fans, microwave ovens, lighting and handicrafts.
Buyer's Note:
1.
Make sure that the motor voltage is correct before use, and if it is a DC motor, also confirm whether the power supply current is sufficient.
2.
It can not be overloaded. The reasons for overloading are mainly divided into two parts, torque and shaft force. The load torque should not exceed the rated torque of the motor, and the shaft force should not exceed the axial and radial allowable force of the shaft. After the load is applied, the measured current of the motor cannot exceed the rated current. Generally, the motor must be equipped with a fuse to avoid overloading the motor.
3.
Do not store or operate in a high temperature or humid environment, and do not place it in corrosive gas, which will reduce the performance of the motor.
4.
When assembling transmission parts such as gears and pulleys on the motor shaft, do not knock abnormally when pressing in.
5.
When soldering is required on the motor terminals of the positive and negative poles of the power supply, the temperature of the soldering iron is 340°C±40°C, and the heating time is within 3 seconds, and the plastic cannot be deformed. During work, let the solder point flow into the motor or break the end of the wire. Deterioration of motor function.
6.
When installing the motor, pay attention to whether the screws are too long, and prevent the long screws from pressing the parts inside the motor.
7.
Torque concept: For example, when driving the pulley, the torque of 10KG.CM, the pulley radius is 1CM, the belt has 10KG pulling force, and if the pulley radius is 5CM, the belt has only 2KG pulling force.
8.
Common units: 1N.M=10KG.CM==0.1KG.M, 1HP=750W, 1W=1V.A
☎️☎️ ☎️ （If you need other size, you can chat with us privately.）☎️ ☎️ ☎️
About packaging
:
Shipment according to your choice.
Notes:
✔️
Large quantity accepts various sizes and can be customized.
📞If you can't find the relevant series of goods, you can ask us. We will be happy to help.
✔️If you need to buy more than one item, you can add a shopping cart first, and there will be a bigger discount.
📞Purchasing different products may result in abnormal shipping costs. If the shipping cost is too high, please contact us.
✍The pictures are for reference only, please choose your requirements (size, quantity).